Description
- MATERIAL: Polyurethane; DIAMETER: 17-1/22\"; DEPTH: 1\"; INSIDE HOLE: 3-1/2\"; WEIGHT: 1.61lb
- CEILING MEDALLIONS are the perfect finishing touch for your interior design project. Use them to add luxury and charm to a ceiling fan or light fixture
- LIGHTWEIGHT and innovative modern design makes it easy to install them to vertical surfaces.
- MADE FROM dense durable Polyurethane. Lasts a lifetime. Safe to install indoors or out.
- EXQUISITE detail and design consistency. Won\'t crack or splinter like wood or hard plastic. Waterproof.
Painting\nMany of our medallions have very intricate details and can be very difficult to finish once installed. We recommend painting your medallion before installing it. A high-quality spray paint, Latex or faux finishes work great. You can then touch up any areas that need attention after the installation is complete. This material is delivered pre-primed for paint.\nAdhesive\nYou can use any adhesive that is rated for use with polyurethane (check the back of the label) -- we have had great success using Red Devil Construction Adhesive, Loctite Powergrab and PL Premium Polyurethane Adhesive, all of which work well and are readily available at most home improvement stores.\nInstallation\nRun a 1/4\" continuous bead of adhesive around the outer edge and randomly in other areas on the back of the ceiling medallion. Press the medallion up into place using a few finish nails or screws to secure the medallion while the adhesive dries. Once the medallion is in place you can caulk any holes and around the perimeter of the medallion using a paintable caulking. Touch up the paint if needed.\nMedallions are for decorative purposes only and cannot support the weight of a fan or light fixture. Your fixture must be supported by a support or junction box in the ceiling.\nMany of our medallions come with solid centers to allow you to cut the correct size hole for your application. Take the bracket for your ceiling fan or light fixture and trace the area that you want to remove from the ceiling medallion. You will need a hole large enough for the wiring and holes for the bolts to pass through to affix your bracket to the junction box. The polyurethane material is easily cut so you can use a hole saw or a drill to punch out a hole. The hole doesn\'t have to be perfect since the fixture canopy will cover the hole.