STEPPERONLINE Nema 23 CNC Stepper Motor 2.8A 178.5oz.in/1.26Nm CNC Stepping Motor DIY CNC Mill image-1

STEPPERONLINE Nema 23 CNC Stepper Motor 2.8A 178.5oz.in/1.26Nm CNC Stepping Motor DIY CNC Mill image-2

STEPPERONLINE Nema 23 CNC Stepper Motor 2.8A 178.5oz.in/1.26Nm CNC Stepping Motor DIY CNC Mill image-3

STEPPERONLINE Nema 23 CNC Stepper Motor 2.8A 178.5oz.in/1.26Nm CNC Stepping Motor DIY CNC Mill image-4

STEPPERONLINE Nema 23 CNC Stepper Motor 2.8A 178.5oz.in/1.26Nm CNC Stepping Motor DIY CNC Mill image-5

STEPPERONLINE Nema 23 CNC Stepper Motor 2.8A 178.5oz.in/1.26Nm CNC Stepping Motor DIY CNC Mill image-6

STEPPERONLINE Nema 23 CNC Stepper Motor 2.8A 178.5oz.in/1.26Nm CNC Stepping Motor DIY CNC Mill image-7

STEPPERONLINE

STEPPERONLINE Nema 23 CNC Stepper Motor 2.8A 178.5oz.in/1.26Nm CNC Stepping Motor DIY CNC Mill

Order within 0 hours and 0 minutes to get between - Buying Bulk?

Tracked Shipping on All Orders

14 Days Returns

Description

Higher Torque
1.26Nm(178.4oz.in) holding torque
NEMA 23 bipolar 2.24\"x2.24\"x2.2\" 4-wire
1.8 deg. step angle(200 steps/rev)
Rated current 2.8A & resistance 0.9ohms

This bipolar Nema 23 stepper motor with 1.8 deg. step angle (200 steps/revolution).\nEach phase draws 2.8A, allowing for a holding torque of 1.26Nm(178.4oz.in).\n\nElectrical Specification:\n\n* Manufacturer Part Number: 23HS22-2804S\n* Motor Type: Bipolar Stepper\n* Step Angle: 1.8 deg.\n* Holding Torque: 1.26Nm(178.4oz.in)\n* Rated Current/phase: 2.8A\n* Phase Resistance: 0.9ohms\n* Inductance: 2.5mH+/-20%(1KHz)\n\nPhysical Specification:\n\n* Frame Size: 57 x 57mm\n* Body Length: 56mm\n* Shaft Diameter: 6.35mm\n* Shaft Length: 21mm\n* Number of Leads: 4\n* Lead Length: 500mm\n* Weight: 700g\n\nConnection:\n\nBlack(A+), Green(A-), Red(B+), Blue(B-)\n\nWarning:\n\nMake sure the motor connect to a constant current or chopper drive controller before you test motor.\nConnecting the motor directly to a power supply will destroy the motor.